Site Servicing Permits

A Site Servicing Permit is required for the connection of all underground site servicing from private property to the City of St. Albert mains. This includes:

  • Water distribution
  • Wastewater collection
  • Stormwater collection

The requirement for this permit applies to commercial, institutional and multi-family development. Depending on the construction schedule, a Site Servicing Permit (SSP) can be submitted for all three service connections at once or any combination of separate connections. The Site Servicing permit must be approved and an On-Street Construction Permit (OSCP) in place before the contractor is authorized to perform any construction activity on-site. It takes 7 days for approval of the Site Servicing Permit.

Please do not confuse the SSP and applicable fees with the Building Sewer & Water Permit that is issued by the Building Inspections Branch in conjunction with the Building Permit.

How do I obtain a Site Servicing Permit?

The general process is as follows:

  1. The Site Servicing Permit (SSP) application can be submitted
    1. by email to jfenton@stalbert.ca
    2. in-person to the Engineering Services department at St. Albert Place, 5 St. Anne Street
  2. An SSP is required for projects completed under a development agreement (DA); however, no SSP fees are required as inspection fees are captured within the DA.
  3. The SSP fees for projects completed under a development permit (DP) are based on a quantity take-off of site servicing infrastructure and the assigned values from the Master Rates Bylaw.
  4. A complete application package must be submitted a minimum of seven (7) working days prior to the proposed construction start date.
  5. The application must be dated and signed.
  6. The applicant must provide a detailed Work Plan for each service connection and a Contingency (Emergency) Plan for the water service connection. See the description/definition below.
  7. An OSCP must be submitted and approved prior to the start of construction.
  8. All service connections must be inspected by the correct City of St. Albert inspector prior to backfill.

What is a Work Plan?

The Work Plan is a written description (point form is fine) detailing the procedures employed in the completion of the work including such items as the type of connection, pipe material, testing procedures and inspections, etc.

A separate Work Plan is required for water, wastewater (sanitary) and stormwater.

What is a Contingency Plan?

The Contingency (Emergency) Plan outlines the procedures employed in the event of an emergency while connecting to the City water supply. Please provide a drawing that clearly indicates the location of the isolation valves needed to shut down the water supply. In addition, provide a written description of these isolation valve locations in the Contingency (Emergency) Plan.

The SSP application must be based upon a civil engineering drawing submission that has been reviewed and accepted by Engineering Services.

Forms


Water and Wastewater Work Procedures

 

Sample Documents

Sample Work and Contingency Plans I

Sample Work and Contingency Plans II

Sample Location Map showing Water Isolation Valves

 

Allowable Work Hours

Permitted working hours within City limits, in accordance with the City of St. Albert Noise Bylaw 31/2006, are the following:

Monday to Friday 7:00 am to 10:00 pm
Saturday 9:00 am to 11:00 pm
Sundays and Holidays 9:00 am to 10:00 pm

Related Pages

Last edited: November 27, 2019